MTC Viper Pro 10 x 44

Introduction to the MTC Viper Pro

This revolutionary new scope contains the best and most sophisticated turret design available anywhere, the top turret contains a micro gearbox rotating at a 3-1 ratio , this means that three rotations of the top turret translates to a single rotation or the indicator drum making it much easier to know where you are in terms of rotations. Its turret ‘window’ shows a customisable ribbon that shows exactly the information you want from Mills to MOA , even yards or metres can be displayed: It’s your choice.

• MTC Viper Pro
  1044
• 10x Magnification
• 44mm Objective Lens

MTC SCB2 Reticle

The Small Calibre Ballistic (SCB) reticle offers an incredible amount of aim points with a floating cross for clear and accurate target acquisition. This is ideal for use on small targets. The 1 mil dot square around the cross gives a rapid acquisition for small fast moving targets such as rats. When shooting at small targets or when bullet drop becomes critical the versatility of this reticle becomes clear.

MTC Viper Pro 1044 Specifications

• Magnification 10x
• Objective Lens , 44mm
• FOV @ 1000m , 140m / 23m
• Diopter Adj , +/-2
• Eye Relief , 100mm
• Parallax Setting , 10m -infinity
• Adj per click , 1/4 MOA
• Max Windage Adj , 42 MOA
• Max Elevation Adj , 42 MOA
• Clicks per one turret revolution , 40
• MOA per one turret revolution , 10
• MOA per one Distance Disc revolution , 30
• Number of steps in one Distance Disc revolution -120
• Max drop covered in one Distance Disc revolution @ 100m , 87.6cm
• Max drop covered in one Distance Disc revolution @ 100yds , 31.41 inches
• Impact point correction in one click @ 100m , 0.73cm
• Impact point correction in one click @ 100yds , 0.26 inches
• Tube , 30mm
• Illuminated reticle with separate on/off and brightness control
• Length , 365mm
• Weight , 750g
• Length of range tape if placed on top of MOA ring , 94.2mm
• Length of range tape if placed carriage directly , 89.9mm